Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring QoS (Rev. 03)
Overview
© 2008 Foundry Networks, Inc.
Page 16 of 62
QoS Configuration Flow
Table 4
shows the default The following flow chart shows the process of configuring the QoS
parameters.
Figure 9: QoS Configuration Flow
QoS Default Configuration
Table 4
shows the QoS default configuration.
Table 4: QoS Default Configuration
Feature
Default Value
Start
Set the Priority Value Mapping to QoS Queues
Set 802.1p Priority Information on a Port
Set the Destination MAC Address Priority
Set the Priority Remarking Policy
Configure Tx Scheduling
Set the DSCP-to-CoS Mapping
Set the DSCP Remarking Policy
Configure Traffic Shaping
End
Configure Congestion Avoidance Mechanisms
Configure interface based mapping (ToS, VPT)