Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 14 of 113
Command Syntax
device-name
(config-if sw
N
)#
mpls
[
rsvp
|
ldp
]
device-name
(config-if sw
N
)#
no mpls
[
rsvp
|
ldp
]
Argument Description
rsvp
(Optional). Enables/disables RSVP.
ldp
(Optional). Enables/disables LDP.
Setting the MPLS Egress Label Range
The
mpls egress-label-range
command, in IP Interface Configuration mode, specifies the range
for the egress label value on a specific MPLS IP interface. The egress label range relates to the
labels which are provided by the
device
to a neighboring LSR. To remove the specified range, use
the
no
form of the command.
By default, the MPLS Egress Label Range is disabled on the IP interfaces.
Command Syntax
device-name
(config-if sw
N
)#
mpls
egress-label-range <28672-131071> <28672-
131071>
device-name
(config-if sw
N
)#
no
mpls
egress-label-range
Argument Description
28672-131071
Specifies the minimum egress label value in the range <28672-131071>.
The minimum egress label value must be less than the maximum egress
label value.
28672-131071
Specifies the maximum egress label value in the range <28672-
131071>. The maximum egress label value must be greater than the
minimum egress label value.
Setting the MPLS Ingress Label Range
The
mpls ingress-label-range
command, in IP Interface Configuration mode, specifies the range
for the ingress label value on a specific MPLS IP interface. The ingress label range corresponds to
the labels which are provided by a neighboring LSR to the
device
. To remove the specified range,
use the
no
form of the command.
By default, the MPLS Ingress Label Range is disabled on the IP interfaces.
Command Syntax
device-name
(config-if
swN
)#
mpls
ingress-label-range <28672-131071>
<28672-131071>
device-name
(config-if
swN
)#
no mpls
ingress-label-range
Argument Description
28672-131071
Specifies the minimum ingress label value in the range <28672-131071>.
The minimum ingress label value must be less than the maximum ingress
label value.