Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Configuration Examples
© 2008 Foundry Networks, Inc
Page 37 of 40
5: set
pingCtlTable.pingCtlTrapGeneration.default.T1
is set to
testCompletion(2)
***** SNMP SET-RESPONSE END *******
Configure the SAA Test on Device3:
1. Create a new SAA test:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlRowStatus.default.T1
with value createAndWait(5)
***** SNMP SET-RESPONSE END *******
2. Configure the MEF OAM private attributes for the test by setting the VC ID and MAC address:
***** SNMP SET-RESPONSE START *****
1: set
saaPingCtlTable.saaPingCtlTestType.default.T1
with value
mefOamMacPing(5)
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
2: set
saaPingMEFOAMCtlTable.saaPingMEFOAMVpnId.default.T1
with value 10
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
3: set
saaPingMEFOAMCtlTable
.
saaPingMEFOAMMACAddr.default.T1
with value
11:22:33:44:55:66
***** SNMP SET-RESPONSE END *******
3. Enable the SAA test:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlRowStatus.default.T1
with value active(1)
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
2: set
pingCtlTable.pingCtlAdminStatus.default.T1
with value enabled(1)
***** SNMP SET-RESPONSE END *******
Display the SAA Test Result and SAA Threshold Profile on Device1:
1. Display the SAA test results:
***** SNMP SET-RESPONSE START *****
1: get
pingCtlTable
row entry with index
pingResultsOperStatus.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
2: get
pingCtlTable
row entry with index
pingResultsMinRtt.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
3: get
pingCtlTable
row entry with index
pingResultsMaxRtt.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
4: get
pingCtlTable
row entry with index
pingResultsAverageRtt.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
5: get
pingCtlTable
row entry with index
pingResultsSentProbes.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
6: get
pingCtlTable
row entry with index
pingResultsProbeResponses.default.T1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****