Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Usage Guidelines
© 2008 Foundry Networks, Inc
Page 23 of 40
Argument Description
0-65535
Specifies the frequency of test repetitions in seconds. By default, no repeat
frequency is specified.
Example
device-name
(config-saa-test)#
frequency 50
6. Specify the probe data length:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlDataSize.default.T1
with value 74
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
data-size
<
64-1489
>
Argument Description
64-1489
Specifies the length in bytes of the probe test data. By default, data-size
is 64 bytes.
Example
device-name
(config-saa-test)#
data-size 74
7. Specify the probe timeout:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlTimeOut.default.T1
with value 5
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
timeout
<
1-60
>
device-name
(config-saa-test)#
no timeout
Argument Description
1-60
Specifies the timeout in seconds. By default, timeout is 3 seconds.
Example
device-name
(config-saa-test)#
timeout 5