Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
MEF OAM
© 2008 Foundry Networks, Inc.
Page 19 of 155
Resetting Calculations
The
clear oam connectivity
command, in Privileged (Enable) mode, resets the calculations that
were accumulated up to the present time for a specific MEF OAM domain/MAC address.
If no argument is specified, the command will reset all the connectivity information.
Command Syntax
device-name
#
clear oam connectivity
[
mac
HH:HH:HH:HH:HH:HH
] [
domain
<domain>
]
Argument Description
mac
HH:HH:HH:HH:HH:HH
(Optional). Specifies MAC address for which the results are reset.
domain <domain>
(Optional). MEF OAM domain level <2-255>.
MEF OAM Specific Domain Configuration Commands
Table 3
lists the MEF OAM specific domain configuration commands.
Table 3: MEF OAM Specific Domain Configuration Commands
Command
Description
oam bridge
Creates a specific MEF OAM domain and enters into the MEF OAM
Configuration mode.
oam bridge tls
Creates a specific MEF OAM per TLS domain.
oam bridge vpls
Creates MEF OAM service oriented bridge.
add ports
Adds ports to the MEF OAM domain.
remove ports
Removes ports from the MEF OAM domain.
add vlans
Adds VLANs to the MEF OAM domain.
remove vlans
Removes VLANs from the MEF OAM domain.
add vpls
Adds virtual circuits to MEF-OAM bridge.
remove vpls
Removes virtual circuits from MEF-OAM bridge.
oam hello-interval
Sets the time interval in seconds for sending multicast periodic Hello
packets.
oam connectivity-
timeout
Enables monitoring on the received Hello packets according to the
timeout threshold interval and optionally sets the maximum timeout
threshold in seconds.
oam hello-rate
Sets the transmission rate of the Hello packets.
oam frame-size
Sets the size of Hello packets.
oam priority
Sets the 802.1p priority in the OAM Hello packets.