SMART
SWITCH
TAPT
IN THE BOX
• Wall switch assembly kit with pre-stripped,
stranded wires (green, red, white, and black),
and 4 wire connectors (for wires up to
12 gauge)
• Faceplate (hides visible screws)
• Snap plate (pre-attached)
• User guide
Note: The included faceplate and snap plate
are intended for single gang box installations
only. If installing in a double gang box, use a
double gang wall plate (not included) without
the faceplate and snap plate.
WHAT YOU’LL NEED
• A Wink HUB or ZigBee-enabled, Wink-
certified hub (sold separately)
• Apple® or Android™ smart device (tablets
and desktops not supported)
• The Wink app downloaded to your mobile
device from the iTunes® App Store or Google
Play™. If you already have the Wink app
installed, please download the latest version
to ensure you have the most updated support.
• A Wi-Fi® network connection with a router
using WPA-PSK security. WEP security is
not supported. Please refer to your router’s
manual for instructions on converting your
router to WPA security.
• Slotted screwdriver and Phillips head
screwdriver
IMPORTANT SAFETY INFORMATION
• Read all instructions and warnings prior to
using Tapt. Failure to comply with instructions
and warnings constitutes improper use of Tapt.
Save all instructions.
• Quirky, Inc. not responsible for improper
use, which may result in personal injury or
product damage.
• Not a toy. Keep away from children.
• WARNING: RISK OF ELECTRIC SHOCK
OR FIRE.
Before installing, servicing, or
removing Tapt, TURN OFF POWER AT THE
CIRCUIT BREAKER THAT CONTROLS THE
SWITCH. After power has been turned off,
make sure the light switch you are going to
replace with Tapt is powered down before
continuing installation. It is recommended to
use a circuit tester to make sure the circuit
is off. Exercise extreme caution when using
devices controlled via Tapt.
• This device is intended for installation and
use in accordance with the National Electric
Code (NEC) and local regulations in the United
States, or the Canadian Electrical Code (CEC)
and local regulations in Canada.
If you are
unsure or uncomfortable about performing
this installation, consult a qualified electrician.
• Tapt is a single pole switch and a neutral
connection is required.
• Tapt is not compatible with a 3-way light switch.
• NOT FOR USE WITH MEDICAL OR LIFE
SUPPORT EQUIPMENT.
App-enabled
devices should never be used to supply power
to or control the On/Off status
of medical and/or life support equipment.
• Do not use to control electric heaters or
any other appliances which may present a
hazardous condition due to unattended or
unintentional or automatic power on control.
• 120VAC. Must not exceed 600 watts
(Incandescent); 15 Amps, 1800W (Resistive);
or 1⁄2 HP (Motor). The maximum rating for
entire switch is 1800W (15A) Resistive.
• There are no user-serviceable parts.
• Only use this device with copper or copper-
clad wires.
COMPLIANCE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
The country code selection is for non-US models only
and is not available to all US models. Per FCC
regulations, all Wi-Fi products marketed in US must be
fixed to US operation channels only.
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device.
LIMITED ONE-YEAR WARRANTY
Quirky, Inc. (“Quirky”) Original Purchase Product
Warranty:
Quirky warrants to the original purchaser (“Purchaser”) of
this Quirky product, for the period of one (1) year following
the date on which Purchaser purchases the product, that
the product shall be free of defects in design, assembly,
material, or workmanship.
Quirky will refund or replace, at its option, any defective
product free of charge.
In order to qualify for this warranty, the Purchaser must
provide the defective product and a copy of the original
receipt of purchase to Quirky for inspection. The receipt of
purchase must indicate the product purchased, price paid,
date of purchase, and name of merchant.
To request service under this warranty, contact Quirky at
866-5-QUIRKY or [email protected] and a Quirky
representative will provide instruction on how to proceed.
This warranty shall be null and void if Quirky determines
that the product has been improperly installed, altered
or tampered with in any way. This warranty does not
protect against normal use, wear and tear, or damage due
to abuse.
THIS WARRANTY CONTAINS THE SOLE WARRANTY
OF QUIRKY. THERE ARE NO OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF
ANY, ARE LIMITED IN DURATION TO THE TERM OF
THIS WARRANTY. IN NO EVENT SHALL QUIRKY
BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES SUCH AS,
BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS
ARISING OUT OF THE SALE OR USE OF ANY QUIRKY
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some jurisdictions do not allow exclusions or limitations
on implied warranties or incidental, consequential or other
damages, so the above exclusions and limitations may not
apply to you.
COPYRIGHT AND TRADEMARK NOTICES
©2014 Quirky, Inc. All rights reserved.
Quirky is a registered trademark of Quirky, Inc.
Wink is a trademark of Wink, Inc.
GE is a registered trademark of General Electric Company
and is under license by Quirky, Inc.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
ZigBee is a registered trademark of ZigBee Alliance.
Apple and iTunes are registered trademarks of Apple, Inc.
App Store is a service mark of Apple, Inc.
Android and Google Play are trademarks of Google, Inc.
SUPPORT
Need help?
Email [email protected]
Call 1-866-5QUIRKY
• Switches can be used to turn standard
or smart bulbs on or off
• Programmable features within the Wink app
allow switches to dim smart bulbs
• Tapt can trigger other smart products with
one touch (e.g., Push one of its buttons when
you wake up to open all of your smart blinds,
adjust the smart thermostat to a desired
temperature, and turn on smart light bulbs)
• Switches allow you to schedule standard
bulbs to turn on/off
R-I
NS-
TA
PT-
WH
02 | r
ev1
20
914
INVENTED BY
Michael Taylor
+2020 INFLUENCERS
Tapt was invented by Michael Taylor,
a business analyst from Canton, GA.
An energy-conscious dad of three,
Michael was constantly following
his kids around to make sure they
turned off lights, TVs, and ceiling fans.
He came up with Tapt so he could
manage his household at a glance.
These days, you’re likely to find
Michael practicing taekwondo,
running a Spartan race, or listening
to Weird Al Yankovic.
PART # : R-INS-TAPT-WH02
SPEC : 100gsm bright white C2S, Matte UV
FLAT DIMS : 220 x 336 mm
FINISHING : Z-fold both ways
PANTONE
115 C
