Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 137 of 155
Command
Description
probe-statistics
Specifies the probes number stored in the statistics history table.
profile
Specifies the threshold profile attached to the current SAA test.
data-size
Specifies the probe data length.
timeout
Specifies the probe timeout period for which the probe response is
expected.
reaction-
configuration
Controls the test notifications per test and gives ability when a test
or probe is completed.
Setting the Maximal Number of Concurrent SAA Tests
The
saa max-concurrent-requests
command, in Global Configuration mode, sets the maximum
number of concurrent active tests.
The
no
form of the command resets the number of concurrently active tests to its default value.
By default, the maximum number of concurrent active tests is 10.
Command Syntax
device-name
(config)#
saa max-concurrent-requests
number
device-name
(config)#
no saa max-concurrent-requests
Argument Description
number
Specifies the maximum concurrent active tests, in the range <1-50>.
Example
device-name
#
configure terminal
device-name
(config)#
saa max-concurrent-requests 5
Creating an SAA Test
The
saa test
command, in Global Configuration mode, creates a new SAA test or enters into the
SAA mode to specify parameters of the current test.
The
no
form of the command removes the existing test.t
Command Syntax
device-name
(config)#
saa test TESTNAME
[
OWNERNAME
]
device-name
(config)#
no saa test TESTNAME
[
OWNERNAME
]
Argument Description
TESTNAME
Specifies the name of the test.
OWNERNAME
(Optional). Specifies the name of the test owner.