Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 60 of 98
Defining Network Queue
The
queue
command, in HQoS Network Queue Polic
y
Configuration mode, creates a network
queue.
The
no
form of this command deletes the network queue.
Command Syntax
device-name
(config hqos-net-queue
NETWORK-QUEUE-POLICY-NAME
)#
queue
<queue-id>
Argument Description
queue-id
Specifies the Network Queue ID in the range <1-24>.
Applying WRED Profile on Network Queue
The
wred-profile
command, in Network Queue
Configuration mode, associates a WRED profile
with the queue.
The
no
form of this command removes the association.
Command Syntax
device-name
(config hqos-net-que-que
queue-id
)#
wred-profile
<
wred-profile-
id
>
device-name
(config hqos-net-que-que
queue-id
)#
no wred-profile
Argument Description
wred-profile-id
Specifies the WRED profile ID. Before associating the policy to the
queue, the policy must be created using the
wred-profile
<
wred-profile -
id
> command, in HQoS Configuration mode.
Applying WFQ Profile on Network Queue
The
network-wfq-profile
command, in Network Queue Configuration mode, defines weight
profile for this network queue relative to other network queue of the same interface.
The
no
form of this command resets the weight to the default value.
Command Syntax
device-name
(config hqos-net-que-que
queue-id
)#
network-wfq-profile <net-
wfq-profile-id>
device-name
(config hqos-net-que-que
queue-id
)#
no network-wfq-profile
Argument Description
net-wfq-profile-id
The WFQ scheduling profile consisting of weight for in-profile
and out-of-profile traffic. The values can be in the range <1-16>.