Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Usage Guidelines
© 2008 Foundry Networks, Inc
Page 22 of 40
3. Specify the probes number:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlProbeCount.default.T1
with value 5
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
probe-count
<
1-15
>
Argument Description
1-15
Specifies the number of probes to be performed in each test. By default, the
number of probes count is 1.
Example
device-name
(config-saa-test)#
probe-count 5
4. Specify the probes number stored in the statistics history table:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingProbeHistoryTable.default.T1
with value 10
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
probe-statistics
<
0-255
>
Argument Description
0-255
Specifies the number of probe statistics kept for the test. By default, the number
of probe statistics is 50.
Example
device-name
(config-saa)#
probe-statistics 10
5. Specify the repeat frequency:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlFrequency.default.T1
with value 50
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
frequency <0-65535>