Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Routing Information (Rev. 03)
Configuring IP Unicast Routing
© 2008 Foundry Networks, Inc.
Page 14 of 48
Parameters
Description
BROADCAST – The broadcast address is valid.
NOTRAILERS – The device must avoid using trailers.
RUNNING – The router has successfully allocated needed resources.
SIMPLEX – The router cannot hear its own transmissions.
MULTICAST - The device supports multicast.
ALLMULTI - This router receives all multicast packets.
LOOPBACK - This is a loopback net.
NOARP - There is no address resolution protocol.
POINTOPOINT - The IP interface is a point-to-point link.
inet
The IP address and subnet that was defined for the IP interface.
broadcast
The broadcast IP of the IP interface.
ethernet address
The MAC address of the IP interface.
packets received
Number of packets received on the IP interface.
packets sent
Number of packets sent from the IP interface.
multicast packets
sent
Number of multicast packets sent from the IP interface.
input errors
Number of error packets received on the IP interface.
output errors
Number of error packets sent from the IP interface.
collisions
Always 0.
dropped
Number of dropped packets on this IP interface.
down count
Number of times that the IP interface was in DOWN status.
Displaying the IP Interface Associated VLANs and Ports
The
show subnet-tbl
command, in Privileged (Enable) mode, displays the IP interface
configuration and statistics.
Command Syntax
device-name
#
show subnet-tbl
Example
device-name #
show subnet-tbl
============================================================================
Name | Subnet |VTag| Tagged ports | Untagged ports
----------+---------------------+----+---------------------+---------------
sw0 |011.000.000.011/8 |1 | |1/1/3-1/1/28
sw1 |030.002.001.010/16 |10 | |1/1/1
sw2 |040.002.001.010/16 |20 | |1/1/2
Displaying the ARP Table
The
show ip arp
command, in Privileged (Enable) mode, displays the IP addresses learned by
ARP packets.