Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Interfaces (Rev. 03)
Fast Ethernet and Giga Ethernet Port
© 2008 Foundry Networks, Inc.
Page 6 of 57
device-name
(config-if-group)#
interface range
{
PORT-LIST | PORT-AG-LIST
}
Argument Description
PORT-LIST
One or more port numbers, specified by the following options:
•
UU/SS/PP
– (unit, slot and port number, e.g. – 1/1/8) specifying a single
port;
•
UU
– (1 or 2-digit unit number) specifying all ports on unit;
•
UU/SS
– (unit and slot number) specifying all ports on slot;
•
A hyphenated range of ports, e.g. - 1/1/9-1/1/16.
Several port numbers and/or ranges, separated by commas.
PORT-AG-LIST
The list of LAG names (e.g.
AG01,AG04-AG11
). The allowed LAG ID
numbers are in the range 1-31.
Example
device-name
(config)#
interface range
1/1/1-1/1/3
device-name
(config-if-group)#
Disabling an Interface
The
shutdown
command, in Interface Configuration mode, disables the interface (to receive,
forward and learn). The
no
form of this command enables the interface.
The
shutdown
command disables all functions on the specified interface. This command also
marks the interface as unavailable. To check whether an interface is disabled, use the
show
interface
command in Privileged (Enable) mode. An interface that has been shut down is shown as
administratively down in the display issued by the
show interface
command.
By default, the interface is enabled (active).
Command Syntax
device-name
(config-if
UU/SS/PP
)#
shutdown
device-name
(config-if
UU/SS/PP
)#
no shutdown
Setting a Name to the Fast Ethernet or Giga Ethernet Port
The
name
command, in Interface Configuration mode, assigns a name to the Fast Ethernet or Giga
Ethernet port to facilitate switch administration. The
no
form of the command removes the port
name.
By default, the port has no name.
Command Syntax
device-name
(config-if
UU/SS/PP
)#
name NAME
device-name
(config-if
UU/SS/PP
)#
no name