Foundry NetIron M2404C and M2404F Metro Access Switches
Switch Administration (Rev. 03)
Boot Loader © 2008 Foundry Networks, Inc.
Page 53 of 87
Command Syntax
Loader
(config)#
restore flash
{
1
|
2
}
A.B.C.D
FILE-NAME
Argument Description
1
Restores the primary flash.
2
Restores the secondary flash.
A.B.C.D
Specifies the IP address of the TFTP server where the FLASH memory will
be restored.
FILE-NAME
The name of the backup file.
Boot Parameters Commands
Table 21
lists the commands for configuring and displaying the boot parameters.
Table 21: The Boot Parameters Commands
Command
Description
boot-param device
Sets the source of the application to be either local FS (File
System) or FTP server.
boot-param application
Sets the name of the application file (file name only, without
path).
boot-param ftp-server
Sets the IP of the FTP server.
boot-param ftp-user
Sets the user name for FTP server access.
boot-param ftp-password
Sets the password for FTP server access.
boot-param startup-
config
Specifies the startup configuration.
boot-param
Displays the boot parameters configuration.
Setting the Application Source
The
boot-param device
command, in Loader Configuration mode, sets the source of the
application to be either local FS (File System) or FTP server.
Command Syntax
Loader
(config)#
boot-param device
{
local
|
network
}
Argument Description
local
Starts application from file, stored in local file system.
network
Downloads application from FTP or TFTP server.