Foundry NetIron M2404C and M2404F Metro Access Switches
Appendix A: Default Configuration (Rev. 01)
Default Configuration
© 2008 Foundry Networks, Inc
Page 4 of 38
Boot Loader Default Configuration
Table 4
shows the Boot Loader default configuration.
Table 4: Boot Loader Default Configuration
Parameter
Default Value
Password none
Block start address
0
Block length
256
Buffer Tuning Default Configuration
Table 5
shows the buffer tuning default configuration.
Table 5: Buffer Tuning Default Configuration
Parameter
Default Value
Tiny buffers (16 bytes)
1
Small buffers (64 bytes)
1
Middle buffers (128 bytes)
1
Big buffers (1500 bytes)
1
Large buffers (4096 bytes)
1
CFM-OAM Default Configuration
Table 6
shows the CFM-OAM default configuration.
Table 6: CFM-OAM Default Configuration
Parameter
Default Value
CFM-OAM Disabled
Hello-interval 1
second
MIPs (in Maintenance Domain mode)
Will always be created
Priority (in Maintenance Domain mode)
6
Content of the Sender ID TLV (in
Maintenance Domain mode)
all
The decision regarding the MIPs (in
Maintenance Association mode)
Is taken considering the setting of the enclosing
domain.
Content of the Sender ID TLV (in
Maintenance Association mode)
Is decided by the corresponding setting on the
enclosing domain.