Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SNMP (Rev. 03)
Simple Network Management Protocol
© 2008 Foundry Networks, Inc.
Page 25 of 48
Argument Value
Description
batmPwVcTDMStatusChange
This trap is sent when the operational or
administrative status of circuit changes.
batmSapCreated
This trap is sent when a new row is created in
the sapBaseInfoTable.
batmSapDeleted
This trap is sent when an existing row is deleted
from the sapBaseInfoTable.
batmSapStatusChanged
This trap is generated when there is a change in
the administrative or operating status of an SAP.
batmSdpCreated
This trap is sent when a new row is created in
the sdpInfoTable.
batmSdpDeleted
This trap is sent when an existing row is deleted
from the sdpInfoTable.
batmSdpStatusChanged
This trap is generated when there is a change in
the administrative or operating status of an SDP.
batmSvcCreated
This trap is sent when a new row is created in
the svcBaseInfoTable.
batmSvcDeleted
This trap is sent when an existing row is deleted
from the svcBaseInfoTable.
batmSvcStatusChanged
This trap is generated when there is a change in
the administrative or operating status of a
service.
batmConfigChangeAlarm
This trap is generated when the value of
configurable attribute has been changed. The
notification can be used to trigger maintenance
polling of the running configuration on the
device. One of the variables will point either to
entry of the modified table
(configChangeAlarmRow) or the OID of the
modified scalar
object(configChangeAlarmOID).
mplsTunnelUp
This trap is generated when an
mplsTunnelOperStatus object for one of the
configured tunnels is about to leave the down
state and transition into some other state (but not
into the notPresent state). This other state is
indicated by the included value of
mplsTunnelOperStatus.
mplsTunnelDown
This trap is generated when an
mplsTunnelOperStatus object for one of the
configured tunnels is about to enter the down
state from some other state (but not from the
notPresent state). This other state is indicated by
the included value of mplsTunnelOperStatus.