Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 150 of 155
6. Enable the SAA test:
Device1
(config-saa-test)#
no shutdown
Device1
(config-saa-test)#
end
7. Send a pingTestCompleted notification:
Device1
(config-saa-test)#
reaction-configuration pingTestCompleted
Configure the SAA Test on Device3:
1. Create a new SAA test:
Device3
(config)#
saa test T1
2. Configure the MEF OAM private attributes for the test by setting the VC ID and MAC address:
Device3
(config-saa-test)#
type oam service 11 HH:HH:HH:HH:HH:HH
3. Enable the SAA test:
Device3
(config-saa-test)#
no shutdown
Device3
(config-saa-test)#
end
Display the SAA Test Result and SAA Threshold Profile on Device1:
1. Display the SAA test results:
Device1
#
show saa test T1
Test Name: T1
Test Owner: default
Test type: mef-oam
Administrative status: enabled
MAC: XX:XX:XX:XX:XX:XX
Service: 10
Bucket: 50
Probe priority: 3
Profile Id: 1
Profile Name: Profile
Probes per repetition: 5
Frequency of repetition: 50
Probe timeout: 5 seconds
Trap generation: pingTestCompleted
data-size: 74
Probe history count: 10
Last response time: 5
Probes sent: 120
Probes received: 70
Jitter: 20
Frame Loss: 5%
Latency: 200
Minimum RTT: 20, Maximum RTT: 25, Average RTT: 20, Sum of squares: 5650
2. Display the SAA threshold profile:
Device1
#
show saa profile 1
Profile name: Profile, index: 1