Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Usage Guidelines
© 2008 Foundry Networks, Inc
Page 26 of 40
3. Enable latency error monitoring and set the latency error threshold value:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
saaThresholdProfileLatency.1
with value 200
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-profile)#
latency-error
<
LATENCYERROR_THRESHOLD
>
Argument Description
LATENCYERROR_THRESHOLD
The latency warning-error threshold value. The range is <1-
2147483647> milliseconds.
Example
device-name
(config-saa-profile)#
latency-error 200
4. Enable frame loss error monitoring and set the frame loss error threshold value:
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
saaThresholdProfileFrameloss.1
with value 5.0
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-profile)#
frame-loss-error
<
FRAMELOSSERROR_PERCENT_THRESHOLD
>
Argument Description
FRAMELOSSERROR_PERCENT_THRESHOLD
The frame-loss error threshold. The range is <1.0-
100.0> percents, with a precision of 1/10 of %.
Note that the value of the threshold can be rounded
and a message is shown to user with the rounded
value.
Example
device-name
(config-saa-profile)#
frame-loss-error 5.0
Attach the Specified Threshold Profile to the SAA Test
In the
saaCtlTable
(1.3.6.1.4.1.1991.1.12.1.1.5.130.1.6), SAA-MIB, are executed the following
set of actions:
1.