Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Intermediate 802.3ah EFM OAM
© 2008 Foundry Networks, Inc.
Page 70 of 155
Command Syntax
device-name
(config-if
UU/SS/PP
)
#efm-oam event-forward
{
shutdown
|
status
}
UU/SS/PP
device-name
(config-if
UU/SS/PP
)
#no efm-oam event-forward
Argument Description
shutdown
Shuts down the specified interface as a result of the change of the current
interface status.
status
Forwards a
Link EventNotification
on the specified interface. Note that the
interface that will forward the EventNotification should have the efm-oam
mode enabled.
UU/SS/PP
Target interface on which the action is performed.
Example
device-name
(config-if 1/1/1)
#efm-oam event-forward status 1/1/3
Setting the Number of Entries in EFM-OAM History
The
efm-oam history limit
command,
in Protocol Configuration mode, sets the maximum number
of entries in efm-oam history. The
no
form of the command restores the default value.
By default, a limit of 5000 history entries is specified. The efm-oam history will be rotated at every
24 hours.
Command Syntax
device-name
(cfg protocol)#
efm-oam history limit <1000-10000
>
device-name
(cfg protocol)#
no
efm-oam history limit
Argument Description
1000-10000
Number of entries in efm-oam history in the specified range.
Example
device-name
(cfg protocol)#
efm-oam history limit 2000
EFM-OAM Monitoring and Network Testing Commands
Table 13
lists the EFM-OAM Monitoring and Network Testing commands.
Table 13: EFM-OAM Monitoring and Network Testing Commands
Command
Description
efm-oam ping
Enables the EFM-OAM non-intrusive monitoring on the specific
interface.