Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 52 of 113
NOTE
The
show mpls lsp
command generates “Outgoing Information” output only for
tunnels whose primary LSP path is active.
The
show mpls lsp
command generates “Backup FRR Outgoing Information”
output only for FRR-guarded tunnels.
Displaying the Configured Hold Timer Value
The
show mpls lsp hold-timer
command, in Privileged (Enable) mode, displays the current hold
timer value.
Command Syntax
device-name
#
show mpls lsp
hold-timer
Example
device-name
#
show mpls lsp
hold-timer
lsp hold-timer: 5
Displaying Static LSP Information
Table 17
lists the Static LSP display command.
Table 17: Static LSP Display Command
Command
Description
show mpls static-lsp
Displays information about static LSPs.
Displaying Information about Static LSPs
The
show mpls static-lsp
command, in Privileged (Enable) Configuration mode, displays the
current status of static LSPs.
Command Syntax
device-name
#
show mpls static-lsp
Example
device-nam
e#
show mpls static-lsp
+--------------------------------------------------------+
| Name : staticlsp1 |
| Index : 1 |
| Status: DOWN |
| Type : egress |
+--------------------------------------------------------+
| | In | Act | Out |
+--------------------------------------------------------+
| Label | 444 | pop | - |
| If | sw0 | | - |
| FEC/NH | - | | - |