Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Routing Information (Rev. 03)
Configuring IP Unicast Routing
© 2008 Foundry Networks, Inc.
Page 13 of 48
Displaying the IP Unicast Routing Information
Table 5
lists the commands for displaying the IP unicast routing information.
Table 5: Displaying Commands
Command
Description
show ip interface
Displays the IP interface configuration and statistics.
show subnet-tbl
Displays the IP interfaces configuration for the associated VLANs
and ports.
show ip arp
Displays the ARP table.
Displaying the IP Interface Configuration
The
show ip interface
command, in Privileged (Enable) mode, displays the IP interface
configuration and statistics.
9
Table 6
describes the parameters displayed by the
show ip interface
command.
Command Syntax
device-name
#
show ip interface
[
brief
|
IFNAME
]
Argument Description
brief
(Optional). Displays brief information of all the defined IP interfaces.
IFNAME
(Optional). Displays information about the IP interface that is specified by name
(swN).
Example
device-name
#
show
ip interface sw0
index 3 metric 1 mtu 1500
Flags : <UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST>
inet 10.2.50.155/16 broadcast 10.2.255.255
Ethernet address is 00:12:f2:0f:30:8a
239538 packets received; 15206 packets sent
3617 multicast packets received
56 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
0 down count
Table 6: The Parameters Displayed by the
show ip interface
Command
Parameters
Description
index
Internal index of the IP interface.
metric
The IP interface metric value.
mtu
Maximum Transfer Unit.
flags
UP/DOWN – IP interface status.