![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731375.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Troubleshooting and Monitoring (Rev. 03)
Periodic Monitoring
© 2008 Foundry Networks, Inc.
Page 33 of 55
NOTE
The prompt of the temperature monitoring configuration mode indicates the
temperature monitoring scale setting: C for Celsius or F for Fahrenheit.
Configuring Individual Periodic Monitoring Indicators
Table 17
lists the commands used to configure specific periodic monitoring indicators. The user
must enter into the specific monitoring Indicator Configuration mode to use these commands. To
see how to enter into each Indicator Configuration mode, see
Table 16
.
Table 17: Periodic Monitoring Configuration Commands
Command
Description
enable
Enables the periodic monitoring for a specific indicator.
disable
Disables the periodic monitoring for a specific indicator.
default
Restores
the indicator monitoring configuration to default settings.
log
Enables logging alert notifications for a configured indicator.
status-led
Enables LED alert notification for the configured indicator.
trap
Enables SNMP trap alert notification for the configured indicator.
period
Sets the time intervals at which the indicator is polled for its status.
limit
Sets the limit value that triggers alert notifications.
delta
Sets the scale used to trigger alerts as a measured value changes.
Enabling Periodic Monitoring for a Specific Indicator
The
enable
command, in Monitoring Configuration mode, enables the periodic monitoring for a
specific indicator.
For default values see
Table 13
.
Command Syntax
device-name
(config monitor
INDICATOR)#enable
Example
The following example enables temperature monitoring:
device-name
(config)#
monitor temperature
device-name(
config monitor
temperature
)#
enable
Disabling Periodic Monitoring for a Specific Indicator
The
disable
command, in Monitoring Configuration mode, disables the periodic monitoring for a
specific indicator.
For default values see
Table 13
.