Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring TLS (Rev. 03)
Transparent LAN Services (TLS)
© 2008 Foundry Networks, Inc.
Page 9 of 16
NOTE
The TLS must be enabled before executing this command. To enable the TLS use
the
tls enable
command in Global configuration mode.
The TLS core port must be configured as tagged member on the TLS VLAN.
NOTE
For TLS to be successfully enabled on an uplink which is a port aggregation
(LAG), the
tls uplink
command should be executed in Interface AG Configuration
mode. Enabling TLS on a single port of the LAG will have no effect on the
aggregation.
By default, all the ports are set as residential ports.
Command Syntax
device-name
(config-if
UU/SS/PP
)#
tls uplink
device-name
(config-if
UU/SS/PP
)#
no tls uplink
device-name
(config-if
AGNN
)#
tls uplink
device-name
(config-if
AGNN
)#
no tls uplink
Example
device-name
(config)#
interface ag02
device-name
(config-if
AG02
)#
tls uplink
Setting the Interface as a TLS Access (User) Port
The
tls user
command, in Interface Configuration mode, sets the interface as a TLS access (user)
port. The
no
form of the command sets the interface as a residential port.
The TLS access port is configured at the Provider-network side of the Customer Edge (CE) switch.
NOTE
The TLS must be enabled before executing this command. To enable the TLS use
the
tls enable
command in Global configuration mode.
By default, all the ports are set as residential ports.
Command Syntax
device-name
(config-if
UU/SS/PP
)#
tls user
device-name
(config-if
UU/SS/PP
)#
no tls user
device-name
(config-if
AGNN
)#
tls user
device-name
(config-if
AGNN
)#
no tls user
Example
device-name
(config)#
interface ag05
device-name
(config-if
AG05
)#
tls user