![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731098.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Introduction
© 2008 Foundry Networks, Inc
Page 8 of 40
Object Name
Description
pingCtlMaxRows
This object indicates the maximum number of entries
allowed in the pingProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
pingProbeHistoryTable to allow the addition of an new entry
once the number of rows in the pingProbeHistoryTable
reaches this value.
Old entries are not removed when a new test is started.
Entries are added to the pingProbeHistoryTable until
pingCtlMaxRows is reached before entries begin to be
removed.
A value of 0 for this object disables creation of
pingProbeHistoryTable entries.
pingCtlStorageType
This object indicates the storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar objects in the row.
pingCtlTrapGeneration
The value of this object determines when and if to generate a
notification for this entry:
•
probeFailure(0) - Generate a pingProbeFailed
notification subject to the value of
pingCtlTrapProbeFailureFilter. The object
pingCtlTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before a pingProbeFailed notification can be generated.
•
testFailure(1) - Generate a pingTestFailed notification.
In this instance the object pingCtlTrapTestFailureFilter
can be used to determine the number of probe failures
that signal when a test fails.
•
testCompletion(2) - Generate a pingTestCompleted
notification.
The value of this object defaults to zero, indicating that none
of the above options have been selected.
pingCtlTrapProbeFailureFilter
The value of this object is used to determine when to
generate a pingProbeFailed notification.
Setting pingCtlTrapGeneration to probeFailure(0) implies
that a pingProbeFailed notification is generated only when
the number of successive probe failures as indicated by the
value of pingCtlTrapProbeFailureFilter fail within a given
ping test.
pingCtlTrapTestFailureFilter
The value of this object is used to determine when to
generate a pingTestFailed notification.
Setting pingCtlTrapGeneration to testFailure(1) implies that
a pingTestFailed notification is generated only when the
number of ping failures within a test exceed the value of
pingCtlTrapTestFailureFilter.