Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Multicast Layer 2 (Rev. 03)
GARP Multicast Registration Protocol (GMRP)
© 2008 Foundry Networks, Inc.
Page 40 of 43
Parameter
Default Value
GARP timers
Join time: 200 ms
Leave time: 600 ms
Leave-all time: 10,000 ms.
NOTE
GMRP uses a single access-list resource for each Gigabit Ethernet port and for
each group of 8 Fast-Ethernet ports.
Please consult the “
Configuring Access Control Lists (ACLs)
” chapter for details on
access-list resource allocation.
Configuring and Displaying GMRP
Table 13
lists the GMRP commands.
Table 13: GMRP Commands
Command
Description
gmrp
Changes and displays the GMRP status.
show gmrp
Displays the GMRP status.
Changing the GMRP Status
The
gmrp
command, in Protocol Configuration mode, changes the GMRP status to
enable
or
disable
.
By default, GMRP is disabled.
NOTE
The user must enable GVRP before enabling GMRP.
Command Syntax
device-name
(cfg protocol)#
gmrp
{
enable
|
disable
}
Argument Description
enable
Enables GMRP.
disable
Disables GMRP.
Example
device-name
(config)#
protocol
device-name
(cfg protocol)#
gmrp enable
device-name
(cfg protocol)#
end
device-name
#
show gmrp
GMRP enabled