Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 83 of 98
Example
device-name#show hqos network interface
===================================================================
Network Interface
Egress Queue Policy
Network Policy
-------------------------------------------------------------------
1/1/27
NET_Q1 NET_P1
1/1/28
NET_Q1 NET_P1
===================================================================
Displaying WRED Profile
The
show hqos wred-profile
command, in Privileged (Enable) mode, displays the WRED profile
configuration.
Command Syntax
device-name
#
show hqos wred-profile
<
wred-profile-id
>
Argument Description
wred-profile-id
Specifies the WRED profile ID in the range <1-64>.
Example
device-name#show hqos wred-profile 17
=================================================
Green Green Green Yellow Yellow Yellow
Min Max Prob Min Max Prob
-------------------------------------------------
500 1000 1 200 300 10
=================================================
Displaying Shaping Profile
The
show hqos shaper-profile
command, in Privileged (Enable) mode, displays the shaper profile
configuration.
Command Syntax
device-name
#
show hqos shaper-profile
<
shaping-profile-id
> {
ingress
|
egress
}
Argument Description
shaping-profile-id
The shaping profile ID which identifies the shaping profile.
For L1 schedulers the shaping profile ID is in the range: <3-16>.
For L2 schedulers the shaping profile ID is in the range: <65-216>.
For network ports the shaping profile ID is in the range: <1-2>.
For network queues the shaping profile ID is in the range: <17-64>.
ingress
Specifies if shaping profile is intended for ingress L1/L2 scheduler.
egress
Specifies if shaping profile is intended for egress L1/L2 scheduler.