Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Introduction
© 2008 Foundry Networks, Inc
Page 11 of 40
The following table lists the pingResultsTable objects.
Table 2: pingResultsTable Objects
Object Name
Description
pingResultsOperStatus
This object reflects the operational state of a pingCtlEntry:
•
enabled(1) - Test is active.
•
disabled(2) - Test has stopped.
pingResultsIpTargetAddressType
This object indicates the type of address stored in the
corresponding pingResultsIpTargetAddress object.
pingResultsIpTargetAddress
This objects reports the IP address associated with a
pingCtlTargetAddress value when the destination address is
specified as a DNS name. The value of this object should be
a zero length octet string when a DNS name is not specified
or when a specified DNS name fails to resolve.
pingResultsMinRtt
This object indicates the minimum ping round-trip-time
(RTT) received. A value of 0 for this object implies that no
RTT has been received.
pingResultsMaxRtt
This object indicates the maximum ping round-trip-time
(RTT) received. A value of 0 for this object implies that no
RTT has been received.
pingResultsAverageRtt
This object indicates the current average ping round-trip-time
(RTT).
pingResultsProbeResponses
This object indicates the number of responses received for
the corresponding pingCtlEntry and pingResultsEntry. The
value of this object MUST be reported as 0 when no probe
responses have been received.
pingResultsSentProbes
The value of this object reflects the number of probes sent
for the corresponding pingCtlEntry and pingResultsEntry.
The value of this object MUST be reported as 0 when no
probes have been sent.
pingResultsRttSumOfSquares
This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation. The value of this object MUST be
reported as 0 when no ping responses have been received.
pingResultsLastGoodProbe
This object indicates the date and time when the last
response was received for a probe.
pingProbeHistoryTable
This table defines a table for storing the results of a ping operation. Entries in this table are limited
by the value of the corresponding pingCtlMaxRows object.
This table contains the following objects: