![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_2324273347.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring TLS (Rev. 03)
Transparent LAN Services (TLS)
© 2008 Foundry Networks, Inc.
Page 6 of 16
additional tag. The packet priority can also be based on the IP ToS field. For more information see
“
Configuration Access Control List (ACL)
”.
The TLS ports must be set on a VLAN. The VLAN number could be any VLAN from the VLAN
range <1-4093> as long as the TLS core port is a tagged member in this VLAN and the TLS access
port is an untagged member in this VLAN.
TLS Configuration Flow
Figure 5
displays the process to configure TLS parameters.
Figure 5: TLS Configuration Flow
Default TLS Configuration
Table 1
shows the default TLS configuration.
Start
End
Enable MSTP/RSTP (see “
Configuring MSTP
” and “
Configuring
Configure TLS user ports as edge-ports for xSTP
(see “
Configuring MSTP
” and “
Configuring RSTP
”)
Enable TLS tunneling per port
Is TLS tunneling
needed for xSTP?
Yes
No
Create TLS VLANs (see “
Configuring VLANs
”)
Set TLS uplink
and
TLS user ports
Enable TLS