Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
MEF OAM
© 2008 Foundry Networks, Inc.
Page 46 of 155
sent Hello packet for 45 seconds on any VLAN (already discovered by MEF
OAM):
Device1
(config-oam 255)#
oam connectivity-timeout 45
5.
Restrict reception and transmission of MEF OAM domain multicasts to
ports 1/1/1-1/1/2 for VLANs 2 and 3:
Device1
(config-oam 255)#
add ports 1/1/1-1/1/2
Device1
(config-oam 255)#
add vlans 2,3
6.
Define the maximum rate of MEF OAM domain multicast receptions to 30
PDUs per second (security setting):
Device1
(config-oam 255)#
oam pdu-limit 30
7.
Exit from the MEF OAM Configuration mode:
Device1
(config-oam 255)#
exit
% MEF OAM system is being updated, please wait...
Device1
(config)#
Configuring Device2:
1.
Define device membership in MEF OAM domain 255:
Device2
#
configure terminal
Device2
(config)#
oam bridge
2.
Set the interval between MEF OAM multicast transmissions for domain 255
to 10 seconds:
Device2
(config-oam 255)#
oam hello-interval 10
3.
Enable one-way jitter value monitoring, set its threshold to 500 millisecond
and set each calculation to the last 20 multicast samples received:
Device2
(config-oam 255)#
oam results-bucket-size 20
Device2
(config-oam 255)#
oam jitter 500
4.
Enable connectivity monitoring to all other switches in the MEF OAM
domain and set the threshold to trigger an alert whenever any debice has not
sent Hello packet for 45 seconds on any VLAN (already discovered by MEF
OAM):
Device2
(config-oam 255)#
oam connectivity-timeout 45
5.
Restrict reception and transmission of MEF OAM domain multicasts to port
1/1/2 for VLANs 2 and 3:
Device2
(config-oam 255)#
add ports 1/1/2
Device2
(config-oam 255)#
add vlans 2,3
6.
Define the maximum rate of MEF OAM domain multicast receptions to 30
PDUs per second (security setting):
Device2
(config-oam 255)#
oam pdu-limit 30