![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731150.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring System Message Logging (Rev. 03)
System Message Logging
© 2008 Foundry Networks, Inc.
Page 6 of 22
! time_stamp :: user_id :: device{console | telnet | ssh}
! configuration session number start
!
command 1
command 2
….
!
! configuration session number end
!
The history session is stored in script-like format. This enables the user to easily re-execute the
commands later.
Message Logging Default Configuration
Table 5
shows the message logging default configuration.
Table 5: Logging Default Configuration
Parameter
Default Value
NVRAM history Logging
Only emergency level trap messages are logged.
The PRIORITY field is not recorded.
NVRAM-based Configuration History
Disabled
Logging buffer size
1000 messages
Syslog server IP address
None configured
Logging to buffer
Log module default buffer trap debugging
NOTE
When the
module
MODULE-NAME
argument
is not specified, the default module is
assumed.
NOTE
By default, the logging configuration does not appear in the running configuration.
The default
log [module
MODULE-NAME
] buffer trap debugging
and
log [module
MODULE-NAME
] nvram-history trap emergencies
commands do not appear in the
running configuration for any module.
The detailed logging configuration (the default commands including) are displayed
by executing the
show log module default
command.
Configuring and Displaying System Message LoggingConfiguring
Console-based Logging
1.
To enable displaying the system log messages, set the output device for the log messages, the
trap severity level and any other relevant parameters as follows:
•
For displaying the log messages on the CLI console that is attached to the COM
port, see
Configuring Local Console Logging.