Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 109 of 113
DeviceC
(config-lsp-backup_DeviceA)#
egress-lsr-id 1.1.1.1
DeviceC
(config-lsp-backup_DeviceA)#
exit
DeviceC
(config)#
VPLS Configuration
1.
Set VPLS mode and define VPLS instance to 100:
DeviceC
(config)#
vpls mode qualified
DeviceC
(config)#
vpls 100
2.
Set the vc type to 0x04 (Ethernet tagged mode) and virtual circuit ID to
100
:
DeviceC
(config-vpls 100)#
vc-type vlan
DeviceC
(config-vpls 100)#
def-vc-id 100
3.
Set the MTU value to
1514
:
DeviceC
(config-vpls 100)#
path-mtu 1514
DeviceC
(config)#
4.
Create SAPs:
DeviceC
(config-vpls 100)#
sap 1/1/8 vlan 100
DeviceC
(config-vpls 100)#
sap 1/1/4 vlan 100
5.
Define SDP to point the Head-end device and use the relevant LSP:
DeviceC
(config-vpls 100)#
spoke-sdp ldp-peer 1.1.1.1 lsp toESS
DeviceC
(config-vpls 100)#
exit