![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731247.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 18 of 113
A.B.C.D/M
Specifies a route.
all
Clears all rules.
Setting the Global Ingress Label Range
The
mpls ingress-label-range
command, in Global Configuration mode, specifies the range for
the ingress label value on a global device label pool. The ingress label range concerns the labels
which are provided by a neighboring LSR to the
device
. To remove the configured range, use the
no
form of the command.
By default, the Global Ingress Label Range is disabled.
Command Syntax
device-name
(config)#
mpls ingress-label-range
<28672-131071> <28672-
131071>
device-name
(config)#
no mpls ingress-label-range
Argument Description
28672-131071
Specifies minimum ingress label value in the range <28672-131071>. The
minimum ingress label value must be less than the maximum ingress label
value.
28672-131071
Specifies maximum ingress label value in the range <28672-131071>. The
maximum ingress label value must be greater than the minimum ingress
label value.
Starting/Stopping the LDP Protocol
The
router ldp
command, in Router Configuration mode, enables the LDP protocol and accesses
the LDP protocol configuration mode.
When the
router ldp
command is applied, the LDP configuration tables and negotiated parameters
will be reset.
The
no
form of the command disables the LDP protocol.
Command Syntax
device-name
(config)#
router ldp
device-name
(config)#
no
router ldp
Setting a Transport Label
The
mpls tunnel-label
command, in Global Configuration mode, specifies a label that will be used
as a transport label in all outgoing packets. The
no
form of the command cancels the use of a
transport label in the outgoing traffic.
By default, the use of a transport label is disabled.
NOTE This command is only supported on the T-Metro platform.