background image

0519A

Instruction manual

Wi-Fi SWITCH 

 

V0.0

SHOME-140

IMPORTANTE

INSTALLATION

INSTALLATION AND REGISTRATION OF THE APP

CONFIGURATION

HOW TO USE

SPECIFICATIONS

PÓLIZA DE GARANTÍA 

SHARE CONTROL OF THE DEVICE

CAUTIONS

Before using the product, carefully read this instruction manual to avoid any 

malfunction.

The information is presented only as a reference on the product; Due to updates there may 

be differences.

Check our website

 www.steren.com

 for the latest version of this manual

• This device is not intended for use by persons (including children) whose
   physical, sensory or mental abilities are different or reduced, or lack experience or 
   knowledge
• Children should be supervised to ensure that they do not use the device as toy.
• Do not try to open the equipment; may cause a malfunction and will void the warranty.
• Do not install it in places with high temperatures, excess humidity, under sunlight
   direct or close to equipment that generates heat, or in the open.
• Do not place heavy objects on the switch.
• Do not use chemical or corrosive products to clean it.
• Do not expose the switch to water or humidity conditions.
• Cut off the power supply to make the connections; when you restore it, avoid touch the 
  terminals.

To carry out this instruction, a device with the Android 8.0.0 operating system and the 

Steren Home 

version 

1.0.1 application was used. The configuration and functions may vary depending on the version of the 
application and the operating system used.

Operation of this equipment is subject to the following two conditions: (1) this device may not 

cause harmful interference, and (2) this device must accept any interference, including 

interference that may cause undesired operation.

Enter the application store of your smartphone, to download and install the 

Steren Home

 app.

The instructions and operation may vary if there are updates in the 

application.

1

Remove the lids at each end.

2

Make the connections as shown in the diagram.

N

L

L

N

Input

Output

N

L

L

N

Input

Output

N

L

L

N

Input

Output

Manual on / off switch

Be careful not to touch the Output 

terminals, once you have energized the 

switch.

The light of the switch will flash slowly in blue

N

L

L

N

Input

Output

120 V 

Load of

1 000 watts max

3

Place the covers and fix them with the screws.

1

Open the application 

and select

 Crear 

cuenta nueva

2

To register your account, select the 

country and enter your phone number 

or your email address. When finished, 

tap on the option 

Obtenga el código 

de verificación.

3

Enter the code, and create a password. Press 

Finalizado 

to complete the 

process.

1

After creating your account, select 

Crear hogar

. Assign a name to the 

home and select or create your areas. When finished press  

Finalizado

2

Select the + icon (on the upper right) to add an equipment. After, the 

classification

 Otros

 and finally the option 

Otros

.

3

Press and hold the switch until the flash of light is faster.

1

Select the icon on the upper right side, to access the settings

2

Press 

Compartir Equipo

, and next 

Añadir lo compartido

.

3

Enter the email or phone number of the person with whom you will share 

the device; press 

Finalizado. 

Operating voltage: 100 – 240 V~  50 – 60 Hz 10 A max.

Maximum load: 1 000 W

Stand-by power consumption: 0.1 W/h

Wi-Fi frequency: 2.4 GHz

Standard: IEEE 802.11 b/g/n

4

To check which contacts you share the device with, go back to the previous 

screen.

In the main screen of your contact, the device will be 

added automatically and you can start controlling it.

6

Wait until the connection is made, and then assign a name and an area for 

the switch. Press on 

Finalizado 

to conclude the process.

Set the minutes or hours so that, in 

countdown, the switch is turned off or on.

Just move the hand: first the hours and 

then the minutes. Press 

Aceptar 

to 

confirm.

-To program it to turn off, it must first be 

  turned on.

-To turn on, it must first be turned off.

In order to share the control of this device with another person, you must have 

previously installed the application and created an account.

Add an automatic on or off schedule.

Press Añadir temporización. Then, set the time and status of the 

switch (On / Off) and select  

Guardar

.

4

When the light is flashing, 

select 

La luz de confirmación 

en flash.

5

Enter the password of the 

network on which the device will 

be connected, and press 

Confirmar

Switch 

On / Off

Switch 

On / Off

Timer

regressive

Timer

by schedule

CountDown

Schedule

[email protected]

Product: Wi-Fi SWITCH 

Model: SHOME-140

Branda: Steren

www.steren.com

This Steren product is warranted under normal usage against defects in workmanship and 
materials to the original purchaser for one year from the date of purchase.

CONDITIONS

1. This warranty card with all the required information, invoice or purchase ticket, product box 
   or package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.  The supplier 
   will pay for transportation charges.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as 
    warranty service, at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, 
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper 
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

RETAILER INFORMATION

Name of the retailer ____________________________________
Address _____________________________________________
Serial number ________________________________________
Product ______________________________________________

ELECTRÓNICA STEREN S.A. DE C.V. 

Biólogo Maximino Martínez No. 3408 , San Salvador 
Xochimanca, Del. Azcapotzalco, Ciudad de México, 
02870, RFC: EST850628-K51 

STEREN PRODUCTO EMPACADO S.A. DE C.V.

Autopista México-Querétaro. Km 26.5 Sin número, 
Nave Industrial 3-A, Col. Lomas de Boulevares, 
Tlalnepantla de Baz, Estado de México, C.P. 54020,  
RFC: SPE-941215-H43

In case your product fails or have 
questions, please contact your 
nearest dealer.
If you are in Mexico, please call to 
our 

Call Center.

01 800 500 9000

N

L

L

N

Inp
ut

Outpu

t

Summary of Contents for SHOME-140














Reviews: