Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 50 of 113
Show Ingress/Egress Marking Policies
The
show mpls route-marking-policies
command, in Privileged (Enable) mode, shows all
currently defined route marking policies.
Command Syntax
device-name
#
show mpls route-marking-policies
Displaying LSP Information
Table 15
lists the LSP display command.
Table 15: LSP Display Command
Command
Description
show mpls lsp
Displays the current status of the LSP.
show mpls lsp hold-
timer
Displays the length of the hold timer.
Displaying the Status of MPLS LSPs
The
show mpls lsp
command, in Privileged (Enable) Configuration mode, displays the current
state of the LSP.
Command Syntax
device-name
#
show mpls lsp
[
name
WORD
]
[
ingress
|
transit
|
egress
]
[
details
]
Argument Description
name WORD
Specifies the name of the LSP.
ingress
(Optional). Displays only originating LSPs.
transit
(Optional). Displays only transit LSPs.
egress
(Optional). Displays only terminating LSPs.
details
(Optional). Displays the whole detailed output.
Example
device-name
#
show mpls lsp details
Tunnel configuration
Tunnel name : tunnel1
State : [ CREATED | ACTIVE | FRR GUARDED | PRIMARY ACTIVE ]
+-----+--------+---------------+---------------+------+------+----------+
|Index|Virt If |Ingress LSR ID | Egress LSR ID |S prio|H prio| FRR Mode |
+-----+--------+---------------+---------------+------+------+----------+