Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 85 of 113
Setting Fast Reroute Retry Interval
The
fast-reroute retry-interval
command, in Router Configuration mode, specifies the time
interval (in milliseconds) between retries when trying to set up a backup LSP with a view to
provide Fast Reroute protection.
The default value is 30000ms.
Command Syntax
device-name
(config-router)#
fast-reroute retry-interval <1000-214783647>
device-name
(config-router)#
no fast-reroute retry-interval
Argument Description
1000-214783647
Specifies the retry interval in milliseconds.
Setting the Percentage Increase in the Notify Rapid
Retransmission Interval
The
rsvp-notify-rr-decay
command, in Router Configuration mode, specifies the increase of the
rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A
value of 0 indicates a constant retransmission rate.
The
no
form of this command sets the Notify RR-decay to the default value of 100%
By default RR-decay is set to 100%.
Command Syntax
device-name
(config-router)#
rsvp-notify-rr-decay <0-100>
device-name
(config-router)#
no
rsvp-notify-rr-decay
Argument Description
0-100
Specifies the increase value in percents.
Setting an Interval to Wait before Resending Notify Message
The
rsvp-notify-rr-interval
command, in Router Configuration mode, specifies the interval (in
milliseconds) before a Notify message is resent. Such a message is to be sent in case no
acknowledgement is received.
The
no
form of this command sets this parameter to the default value of 2000 milliseconds.
By default this parameter is set to 2000 milliseconds.
Command Syntax
device-name
(config-router)#
rsvp-notify-rr-interval <1000-214783647>
device-name
(config-router)#
no
rsvp-notify-rr-interval
Argument Description
1000-214783647
Specifies the interval in milliseconds.