Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
802.1ag Connectivity Fault Management (CFM)
© 2008 Foundry Networks, Inc.
Page 106 of 155
Level: 3
Maintenance association: ma5
VLAN ID: 5
Priority: 6
Hello Interval (ms): 1000
Mip Policy: default
Local MEPs
=======================================================
| MEP | Port | Adm | Oper | Sent | Last |
| | | State| State| CCM | CCM |
|-----+-------+------+------+-------+-----------------|
| 555 | 1/1/10| Up | UP | 449| 16:30:27.120 |
=======================================================
Displaying Connectivity Statistics
The
show cfm connectivity
command, in Privileged (Enable) mode, displays connectivity
statistics for all configured domains or for a specified domain.
For the
show cfm connectivity
command to take effect
,
CFM should first be enabled in the
Protocol Configuration mode. Otherwise, the “%CFM not active” error message will be generated.
Command Syntax
device-name#show cfm connectivity
[
domain NAME
] [
ma MA NAME
]
[
extended
]
Argument Description
domain NAME
(Optional). Specifies the name of the maintenance domain to display
connectivity statistics.
By default, the statistics information for all defined domains will be
displayed.
ma MA NAME
(Optional). Specifies the name of the maintenance association to be
displayed. By default, all MAs, defined in
DOMAIN NAME
, will be
displayed.
extended
(Optional). Displays the information extracted from the Port ID TLV in
CCMs.
Example 1
device-name#show cfm connectivity
Domain: d1
Level: 3
Hello-frequency: 10
Maintenance Association: ma1
VLAN ID: 3
Priority: 4
Hello Interval (ms): 1000
Remote MEPs
================================================================
MEP | MAC-address | Adm | Oper |Received| Last |
| |State | State | CCM | CCM |
-----+-------------------+------+-------+----------------------|