Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 71 of 98
weight
Specifies the weight assigned for both committed and excess
traffic in the range <1-240>.
Values will be rounded automatically in SW to fit the following
range: 1-32, 40, 48, 56, …, 216.
Applying WFQ Profile on a Scheduler
The
scheduler-wfq-profile
command, in Scheduler Ingress/Egress Configuration modes, applies a
WFQ profile on a scheduler.
The
no
form of this command resets the weights to the default values.
Command Syntax
device-name
(config hqos-in-sched-policy-sched
SCHEDULER-NAME
)#
scheduler-
wfq-profile <scheduler-wfq-profile-id
>
device-name
(config hqos-in-sched-policy-sched
SCHEDULER-NAME
)#
no
scheduler-wfq-profile
device-name
(config hqos-eg-sched-policy-sched
SCHEDULER-NAME
)#
scheduler-
wfq-profile <scheduler-wfq-profile-id
>
device-name
(config hqos-eg-sched-policy-sched
SCHEDULER-NAME
)#
no
scheduler-wfq-profile
Argument Description
scheduler-wfq-profile-id
Specifies the scheduler WFQ Profile ID.
Applying WFQ Profile on a Service Queue
The
service-wfq-profile
command, in Service Ingress/Egress Queue Configuration mode, applies
a WFQ profile on a service queue.
The
no
form of this command resets the weight to the default value.
Command Syntax
device-name
(config hqos-in-queue
queue-id
)#
service-wfq-profile <service-
wfq-profile-id>
device-name
(config hqos-in-queue
queue-id
)#
no
service-wfq-profile
device-name
(config hqos-eg-queue
queue-id
)#
service-wfq-profile <service-
wfq-profile-id>
device-name
(config hqos-eg-queue
queue-id
)#
no
service-wfq-profile
Argument Description
service-wfq-profile-id
Specifies the Service Queue WFQ Profile ID.
Applying WFQ Profile on a Network Queue
The
network-wfq-profile
command, in Network Queue Configuration mode, applies a WFQ
profile on a network queue.
The
no
form of this command resets the weights to the default values.