Foundry NetIron M2404C and M2404F Metro Access Switches
Switch Administration (Rev. 03)
Boot Loader © 2008 Foundry Networks, Inc.
Page 55 of 87
Setting the Startup Configuration Name
The
boot-param startup-config
command, in Loader Configuration mode, sets the name of the
startup configuration.
Command Syntax
Loader
(config)#
boot-param startup-config
[
FILE-NAME
|
default
|
binary
[
FILE-NAME
|
default
]]
Argument Description
FILE-NAME
(Optional). The name of the startup-configuration
default
(Optional). Sets the default name of the startup configuration
binary
(Optional). Sets the binary startup configuration.
Displaying the Boot Parameters Configuration
The
boot-param
command, in Loader and Loader Configuration modes, displays the boot
parameters configuration.
Command Syntax
Loader
>
config
Loader
(config)#
boot-param
Example
Loader
(config)#
boot-param
IP address =
10.10.10.10/16
Device
= network
application
= M2404Cv2.0
Startup configuration =
Statup binary config =
FTP server
= 10.10.10.1
FTP_user
= foundry
FTP_password
=
Boot flags =
Memory Debug Tools
Table 22
lists the commands for the memory debug tools.
NOTE
The commands in this section should be used only by Technical Support
department.