Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 148 of 155
Device1
(config vlan)#
exit
4. Enable MPLS on interface lo1:
Device1
(config)#
interface lo1
Device1
(config-if lo1)#
mpls
Device1
(config-if lo1)#
exit
5. Enable LDP protocol:
Device1
(config)#
mpls lsr-id 1.1.1.1
Device1
(config)#
router ldp
Device1
(config-router)#
transport-address 1.1.1.1
Device1
(config-router)#
targeted-peer 3.3.3.3
Device1
(config-router-peer 3.3.3.3)#
exit
Device1
(config-router)#
exit
6. Set VPLS mode on
Device1
and define VPLS instance “10”:
Device1
(config)#
vpls mode unqualified
Device1
(config)#
vpls 10
Device1
(config-vpls 10)#
def-vc-id 10
Device1
(config-vpls 10)#
sap 1/1/7
Device1
(config-vpls 10)#
no shutdown
Device1
(config-vpls 10)#
sdp 1.1.1.1
Device1
(config-vpls-sdp 1.1.1.1)#
no shutdown
Device1
(config-vpls-sdp 1.1.1.1)#
exit
Device1
(config-vpls 10)#
exit
Device3 Configuration:
1. Create interface lo1 and VLAN v10:
Device3
#
configure terminal
Device3
(config)#
interface lo1
Device3
(config-if lo1)#
ip address 3.3.3.3/8
Device3
(config-if lo1)#
exit
Device3
(config)#
vlan
Device3
(config vlan)#
create v10 10
Device3
(config vlan)#
config v10
Device3
(config-vlan v10)#
add ports 1/1/27,1/1/28 untagged
Device3
(config-vlan v10)#
add ports default 1/1/27,1/1/28
Device3
(config-vlan v10)#
rif lo1
Device3
(config-vlan v10)#
exit
2. Add access port to its own customer VLAN (v11) for unqualified mode:
Device3
(config vlan)#
create v11 11
Device3
(config vlan)#
config v11
Device3
(config-vlan v11)#
add ports 1/1/7 untagged
Device3
(config-vlan v11)#
add ports default 1/1/7
Device3
(config-vlan v11)#
exit
3. Remove uplink and access ports from the default VLAN:
Device3
(config vlan)#
config default
Device3
(config-vlan default)#
remove ports 1/1/27,1/1/28,1/1/7
Device3
(config-vlan default)#
exit
Device3
(config vlan)#
exit