Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Switch Authentication Features (Rev. 03)
802.1x Port-Based Authentication
© 2008 Foundry Networks, Inc.
Page 67 of 70
Example
device-name
#
show debug dot1x
PBA core debugging is on: 802.1x core process,Re-Authentication
process
PBA Authenticator State Machine debugging is on:
status,events,timers
PBA Backend State Machine debugging is on:
status,events,timers
PBA RADIUS debugging is on: packet send,packet receive,events,
PBA EAPOL debugging is on: packet send,packet receive
Configuration Example
Set the RADIUS server and specify the IP address, key, username, password and AAA
authentication:
device-name
#
configure terminal
device-name
(config)#
radius-server host 9.0.0.26
device-name
(config)#
radius-server key hello
device-name
(config)#
username
foundry
password a1h8RRzG11d4U a1h8RRzG11d4U
device-name
(config)#
aaa authentication login default radius local
Configure port 1/1/6 of the Authenticator for authorization, setting it to auto authorization mode:
device-name
(config)#
interface 1/1/6
device-name
(config-if 1/1/6)#
dot1x port-control auto