Foundry NetIron M2404C and M2404F Metro Access Switches
Appendix A: Default Configuration (Rev. 01)
Default Configuration
© 2008 Foundry Networks, Inc
Page 21 of 38
MEF OAM Default Configuration
Table 44
shows the MEF OAM default configuration.
Table 44: MEF OAM Default Configuration
Parameter
Default Value
MEF OAM
Disabled
Number of times to repeat a connectivity test
request
1
Number of hops for the OAM traceroute
operation
48
Size of the connectivity test request PDUs
64 bytes
VLAN ID
All
Bridge Level
255
Recalculation Cycle
15 seconds
EtherType 0x889C
Multicast address prefix
01:A0:12:10:00:00
Hello packets monitoring
Enabled
Service
Is not used
Hello interval
15 seconds
Connectivity Timeout
90 seconds
Hello Packet Size
64
Hello Packets Rate
1 PDU in each transmission
Priority 6
PDU Limit
40 PDUs
Jitter monitoring
Enabled
Jitter Value
600ms
One Way Tests Jitter Calculation Bucket
Size
10 PDUs
Repetition cycle of the monitoring process
1 minute
Jitter Error monitoring
Enabled
Jitter Error value
700 ms
Jitter Error period
90 seconds
Jitter Warning monitoring
Enabled
Jitter Warning value
600 ms
Jitter Warning period
180 seconds
Two-Way Tests Frame-Loss Calculation
Bucket Size
30 PDUs