Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Introduction
© 2008 Foundry Networks, Inc
Page 15 of 40
This table contains the following objects:
Figure 7: saaPingResultsTable
The following table lists the saaPingResultsTable objects.
Table 5: saaPingResultsTable Objects
Object Name
Description
saaPingResultsOperStatus
This object reflects the operational state of a pingCtlEntry:
•
enabled(1) - Test is active.
•
disabled(2) - Test has stopped.
saaPingResultsJitter
This object indicates the two-way calculated two-way jitter.
saaPingResultsLatency
This object indicates the two-way calculated two-way
latency.
saaPingResultsFrameloss
This object indicates the two-way calculated two-way frame
loss.
saaThresholdCtlTable
This table defines the threshold profiles for SAA test. It is indexed by unique set of thresholds
uniquely identified by
saaThresholdProfileIndex
. Every set of thresholds forms a profile and it
can have configurable profile name –
saaThresholdProfileName
.
Creating a profile doesn’t
automatically enable threshold monitoring for an existing SAA test. Profile should be attached to a
SAA test using saaCtlTable.
saaThresholdCtlEntry
- This object defines an entry in the saaThresholdCtlTable.
This table contains the following objects:
Figure 8: saaThresholdCtlTable
The following table lists the saaThresholdCtlTable objects.
Table 6: saaThresholdCtlTable Objects
Object Name
Description
saaThresholdProfileIndex
This object indicates index of each profile configured.