![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731069.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Response Time Reporter (RTR)
© 2008 Foundry Networks, Inc.
Page 133 of 155
Displaying the Maximum Number of Concurrently Scheduled
Tests
The
show rtr max-concurrent-tests-limit
command, in Privileged (Enable) mode,
displays the
maximum number of concurrently scheduled tests.
Command Syntax
device-name
#
show rtr max-concurrent-tests-limit
Example
device-name#show rtr max-concurrent-tests-limit
Maximum number of concurrently scheduled tests limited to: 10
Configuration Example
In the following example, a test with name
test1
is created, configured and scheduled for execution.
1. Create a test with name
test1
with owner of the test named
mon
:
device-name
#
configure terminal
device-name
(config)#
rtr test test1 mon
2. Set the test parameters type, protocol, and target IP address:
device-name
(config-rtr)#
type echo protocol icmp 192.168.0.39
3. Set the frequency of test repetition to 20 seconds:
device-name
(config-rtr)#
frequency 20
4. Set the number of probes for which statistics will be maintained to 3:
device-name
(config-rtr)#
probe-statistics 3
device-name
(config-rtr)#
exit
5. Configure the reaction options for
test1
with owner
mon
:
device-name
(config)#
rtr reaction-configuration test1 mon action-type
trapOnly pingProbeFailed 3
6. Schedule the test to start immediately:
device-name
(config)#
rtr schedule test1 mon now
device-name
(config)#
end
7. Display all configured tests:
device-name
#
show rtr test
=====================================================================
test owner |test name |type |status | target address
-----------------+----------------+----------+---------+-------------
|mon |test1 |Icmpecho |enabled |192.168.0.39