Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Multicast Layer 2 (Rev. 03)
Multicast VLAN Registration (MVR)
© 2008 Foundry Networks, Inc.
Page 35 of 43
NOTE
This command applies only to receiver ports and should only be enabled on
receiver ports to which a single receiver device is connected.
Command Syntax
device-name
(config-if
UU/SS/PP
)#
mvr immediate
device-name
(config-if
UU/SS/PP
)#
no
mvr immediate
Disabling MVR on a Single Port
The
no
mvr
command, in Interface Configuration mode, disables the MVR on the configured port.
Command Syntax
device-name
(config-if
UU/SS/PP
)#
no mvr
Displaying the MVR Configuration
Table 11
lists the MVR display commands.
Table 11: MVR Display Commands
Command
Description
show mvr
Displays configured MVR parameters.
show mvr interface
Displays the current MVR ports configurations.
show mvr members
Lists the currently active ports per MVR IP multicast group.
Displaying the MVR Parameters
The
show mvr
command, in Privileged (Enable) mode, displays the following information, with
regard to the switch:
•
MVR status (enabled or disabled)
•
MVR multicast VLAN ID
•
Maximum number of MVR multicast groups
•
Current number of MVR multicast groups
•
Current MVR Query response time (configured or received online from the query router)
•
Configured MVR mode (Static or Dynamic).
Command Syntax
device-name
#
show mvr
Example
device-name
#
show mvr
MVR Status: enable
MVR multicast vlan: 1