Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
MEF OAM
© 2008 Foundry Networks, Inc.
Page 24 of 155
Argument Description
VC-ID
VPLS ID number in the range <0-4294967295>.
If VC-ID is not defined or is not active on the device an error is returned.
Example
device-name
#
config terminal
device-name
(config)#
oam bridge vpls 2
device-name
(config-oam-2
)
#
add vpls 11
Removing Virtual Circuits from the MEF OAM Bridge
The
remove vpls
command, in MEF OAM Configuration mode,
removes virtual circuits from
MEF OAM domain.
By default no virtual circuit is used.
Command Syntax
device-name
(config-oam
LEVEL
)#
remove vpls
<
VC-ID
>
Argument Description
VC-ID
VPLS ID number in the range <0-4294967295>.
If VC-ID is not defined or is not active on the device an error is returned.
Example
device-name
#
config terminal
device-name
(config)#
oam bridge vpls 2
device-name
(config-oam-2)#
remove vpls 11
Setting the MEF OAM Hello Interval
The
oam hello-interval
command, in MEF OAM Configuration mode, sets the time interval in
seconds for sending periodic Hello packets. The
no
form of this command resets the OAM Hello
interval to its default.
By default, the Hello interval is 15 seconds.
Command Syntax
device-name
(config-oam
LEVEL
)#
oam hello-interval
<time-period>
device-name
(config-oam
LEVEL
)#
no oam hello-interval
Argument Description
time-period
Specifies the repetition interval of sending Hello packets. The range is <1-
3600> in seconds.