Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 48 of 113
Command Syntax
device-name
(config)#
customer
name
NAME
[
contactname
CONTACTNAME
] [
phone
<
phone-number
>]
device-name
(config)#
no customer name NAME
Argument Description
NAME
Specifies the name of the customer. The name should not exceed 100
characters.
contactname
CONTACTNAME
(Optional). Specifies the contact person’s name. The contact person’s
name should not exceed 100 characters.
phone
<
phone-
number
>
(Optional). Specifies a phone number for contacting the customer. The
phone number should not exceed 100 characters.
Configuring Customer-Sites
The
customer-site
command, in Global Configuration mode, creates a Customer Site.
The
no
form of this command removes the specified Customer Site.
Command Syntax
device-name
(config)#
customer
-
site
NAME
device-name
(config-customer-site
NAME
)#
device-name
(config)#
no customer
-
site
NAME
Argument Description
NAME
Specifies the name of the Customer Site. The Customer Site name should not
exceed 9 characters.
Assigning Ingress Scheduler Policy to Customer-Site
The
ingress-scheduler-policy
command, in Customer Site Configuration mode, assigns Ingress
Scheduler Policy to the Customer Site. The Scheduler Policy must be created and correctly
configured prior to assigning it to a Customer Site.
The
no
form of this command removes the policy from Customer Site.
Command Syntax
device-name
(config-customer-site
NAME
)#
ingress-scheduler-policy
NAME
device-name
(config-customer-site
NAME
)#
no ingress-scheduler-policy
NAME
Argument Description
NAME
Specifies the name of the Scheduler Policy that is to be applied.