Foundry NetIron M2404C and M2404F Metro Access Switches Configuring VLANs (Rev.03)
GARP VLAN Registration Protocol (GVRP)
© 2008 Foundry Networks, Inc.
Page 69 of 73
device-name
#
show vlan dynamic
=====================================================================
Name |VTag| Rout If | Tagged ports | Untagged ports
-------------+----+----------+---------------------+-----------------
Permanent |1 | sw0 | |1/1/1-1/1/28
Permanent |10 | | |1/1/1,1/1/2
6. Display the dynamic VLANs after they are learned by GVRP, where port
1/1/5 is the port connected to Switch 2:
device-name
#
show vlan dynamic
=====================================================================
Name |VTag| Rout If | Tagged ports | Untagged ports
-------------+----+----------+---------------------+-----------------
Permanent |1 | sw0 | |1/1/1-1/1/28
Permanent |10 | | 1/1/5 |1/1/1,1/1/2
Configuring Switch 2:
1. Enter into Protocol Configuration mode from Global Configuration mode:
device-name
#
configure terminal
device-name
(config)#
protocol
2. Enable GVRP on the switch:
device-name
(cfg protocol)#
gvrp enable
Only the first 64 vlans will be saved, proceed? [y/n] :
y
device-name
(cfg protocol)#
end
3. Display the dynamic VLANs after they are learned by GVRP, where ports
1/1/1 and 1/1/3 are the ports connected to Switch 1 and Switch 3:
device-name
#
show vlan dynamic
=====================================================================
Name |VTag| Rout If | Tagged ports | Untagged ports
-------------+----+----------+---------------------+-----------------
Permanent |1 | sw0 | |1/1/1-1/1/28
DynamicGvrp |10 | | 1/1/1,1/1/3 |
4. Add port 1/1/4 as static to connect Switch 2 to the outside network:
device-name
#
config terminal
device-name
(config)#
vlan
device-name
(config vlan)#
config dynamic 10
device-name
(config-vlan Dynamic_10)#
add ports 1/1/4 untagged
device-name
(config-vlan Dynamic_10)#
add ports default 1/1/4
device-name
(config-vlan Dynamic_10)#
end
5. Display the dynamic VLANs:
device-name
#
show vlan dynamic
=====================================================================
Name |VTag| Rout If | Tagged ports | Untagged ports
-------------+----+----------+---------------------+-----------------
Permanent |1 | sw0 | |1/1/1-1/1/28
Permanent |10 | | 1/1/1-1/1/3 |1/1/4