Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 98 of 113
Figure 18: RSVP-TE FRR Example Setup with Data and HQoS
Configuring
Device A
:
Router Manager Configuration
1.
Assign the In-band IP address:
DeviceA
>
enable
DeviceA
#
configure terminal
DeviceA
(config)#
ip address 10.90.90.90 255.255.255.0
DeviceA
(config)#
HQoS Configuration.
1.
Configure three Shaper Profiles with the following parameters:
DeviceA
(config)#
hqos
DeviceA
(config hqos)#
shaper-profile ingress 66 2000 2000 10 10
%Shaping profile parameters may be rounded!
DeviceA
(config hqos)#
shaper-profile ingress 65 59904 69632 10 10
%Shaping profile parameters may be rounded!
DeviceA
(config hqos)#
2.
Create the Ingress Scheduler Policy named
ing200
:
DeviceA
(config hqos)#
ingress-scheduler-policy ing200
3. Create Root Scheduler:
DeviceA
(config hqos-in-sched-policy ing200)#
scheduler 200 root
DeviceA
(config hqos-in-sched-policy-sched 200)
#exit
4. Create Layer 2 Schedulers and associate with them with the parent
scheduler (the root scheduler) and shaping profiles:
DeviceA
(config hqos-in-sched-policy ing200)#
scheduler 200_1
DeviceA
(config hqos-in-sched-policy-sched 200_1)#
shaper-profile 66