![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731083.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 147 of 155
Figure 25: Performance monitoring of SLA parameters from Device1 to Device3
Device1 Configuration:
1. Create interface lo1 and VLAN v10:
Device1
#
configure terminal
Device1
(config)#
interface lo1
Device1
(config-if lo1)#
ip address 1.1.1.1/8
Device1
(config-if lo1)#
exit
Device1
(config)#
vlan
Device1
(config vlan)#
create v10 10
Device1
(config vlan)#
config v10
Device1
(config-vlan v10)#
add ports 1/1/27,1/1/28 untagged
Device1
(config-vlan v10)#
add ports default 1/1/27,1/1/28
Device1
(config-vlan v10)#
rif lo1
Device1
(config-vlan v10)#
exit
2. Add access port to its own customer VLAN (v11) for unqualified mode:
Device1
(config vlan)#
create v11 11
Device1
(config vlan)#
config v11
Device1
(config-vlan v11)#
add ports 1/1/7 untagged
Device1
(config-vlan v11)#
add ports default 1/1/7
Device1
(config-vlan v11)#
exit
3. Remove uplink and access ports from the default VLAN:
Device1
(config vlan)#
config default
Device1
(config-vlan default)#
remove ports 1/1/27,1/1/28,1/1/7
Device1
(config-vlan default)#
exit