2501 Ludelle Street
Fort Worth, Texas 76105
817-244-6212 Phone • 817-244-4024 Fax
888-350-6588 Sales • 800-423-9696
Tech
E
-mail:[email protected]
Web: www.painlessperformance.com
50201
IN DASH SWITCH PANEL
INSTALLATION INSTRUCTIONS
MOUNT THE SWITCH PANEL IN THE DESIRED LOCATION BY DRILLING
HOLES IN THE DASH TO SUIT YOUR NEEDS. FOUR (4) SCREWS ARE PROVIDED.
(WHEN USING THE
50001
AND
50002
SYSTEMS ONLY)
INSERT THE TERMINATED WIRES INTO THE PLASTIC HOUSING
PROVIDED ACCORDING TO ILLUSTRATION BELOW. USE THE MATING
TERMINAL AND HOUSINGS TO CONNECT THE PANEL TO THE MAIN HARNESS.
THE FOLLOWING INDEX IS A LIST OF WHAT EACH COLOR WIRE IS USED FOR.
RED (12 GA)
SWITCH PANEL POWER INPUT WIRE
BLACK (12 GA)
GROUND
BLUE/YELLOW (14 GA)
TO HEADLIGHT OR DIMMER SWITCH
BLUE (14 GA)
TO ELECTRICAL WATER PUMP
PINK (14 GA)
IGNITION (TO COIL)
PURPLE (14 GA)
START (STARTER SOLENOID)
YELLOW/WHITE (14 GA)
TO ELECTRIC FUEL PUMP #1
BROWN (14 GA)
TO TAIL LIGHTS
GREEN (14 GA)
TO ELECTRIC FUEL PUMP #2
GRAY/WHITE (14 GA)
TO ELECTIRC FAN
ORANGE (14 GA)
TO ACCESSORY
BROWN (18 GA)
TO FUSE BLOCK RELAY (USED W/ 50002
ONLY
