![background image](http://html.mh-extra.com/html/hdc/p-o-p-locks-flex-switch-rs1/p-o-p-locks-flex-switch-rs1_manual_2112369001.webp)
To replace the Flex Switch battery, the battery
cover must be removed. Using only a fingernail
in the depression just above the HDC Inc. shown
in Fig. A, remove cover. Once removed, battery is
visible and accessible. Replacement batteries
are 12v part # GP23A, CN23A, EL12 and VR22 or
similar class battery.
Replacement battery must be installed as shown
in Fig. B. Its orientation is specific to - + polarities
clearly marked.
Replace cover and test.
- +
HDC.Inc.
Front
With Battery Cover
The battery mates to the contacts and cradles
inside the bezel. Battery held in place only by
cover and contacts.
Designed with through holes for
mounting on any flat surface.
63.35mm
2.500in.
56.98mm
2.250in.
31.65mm
1.250in.
2-4 X Min. 5/8 Long
Wood / Metal Screw
Side View
Fig. A
Fig. B
Finger Pull
Confirmation
Led
HDC Inc.
www.poplocks.com
1
RS1 Wireless Switching Guide
Flex Switch Specs
TM
Flex Switch (RS 2)
TM