Tool list
工具参考
Before installation, wear an ESD-preventive wrist strap, and make sure that the wrist
strap has a good skin contact and is well grounded.
在以下安装交换机的过程中，操
作者需佩戴防静电腕带，请确保防静电腕带已经正确接地并与皮肤良好接触。
Mounting the switch to a rack
安装交换机到机柜
Introduction to installation accessories
安装附件介绍
The installation tools are not provided with the switch. Prepare them by
yourself.
交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Phillips screwdriver
十字螺丝刀
Needle-nose pliers
尖嘴钳
ESD-preventive wrist strap
防静电腕带
Claw hammer
羊角锤
Spanner
扳手
Drill
电钻
Marker
记号笔
Grounding cable
地线
Cage nut and M6 screw
(user supplied)
浮动螺母和
M6
螺钉（自备）
Standard front
mounting bracket
标准前挂耳
Wall mounting
bracket
壁挂挂耳
Magnet and countersunk
head screw (optional)
永磁铁和沉头螺钉（选配）
Bail latch
电源线卡钩
Rear mounting bracket and load-bearing screw
后挂耳和承重螺钉
Guide rail and M5 self-
tapping screws (optional)
滑道和
M5
自攻螺钉（选配）
Wall anchor (user supplied)
拉爆膨胀螺栓（自备）
Foot pads
脚垫
M4 screw
M4
螺钉
1
Long front mounting bracket (optional)
加长型前挂耳（选配）
Flathead screwdriver
一字螺丝刀
Installation methods
安装方式
Width
宽度
Depth
深度
Use front mounting
brackets
前挂耳安装
Use front and rear
mounting brackets
前挂耳和后挂耳配
合安装
Use front mounting
brackets and guide
rails
前挂耳和滑道
配合安装
≤
11.8in (300mm)
√
-
√
17.3in
(440mm)
16.5in (420mm)
-
√
√
＜
17.3in
(440mm)
≤
11.8in (300mm)
√
（
Long front mounting
brackets
加长型前挂耳）
- -
Method 1—Using only front mounting brackets
仅使用前挂耳安装
Install standard front mounting
brackets
安装标准前挂耳
Install long front mounting brackets
安
装加长型前挂耳
Select a method based on the
size of your switch and the rack
根据交换机和机柜的尺寸，
选择其中一种
1
Install cage nuts to the
square holes of the rack
安装浮动螺母到机柜方孔条
1U
2
3
Method 2—Using front and rear mounting brackets
前挂耳和后挂耳配合安装
Install the load-
bearing screw
安装承重螺钉
Install the front mounting bracket
安装标准前挂耳
1
Install cage nuts to the square
holes of the rack
安装浮动螺母到机柜方孔条
1U
2
2
